Range Of Remote Control; Connecting The Device; Connect Audio Cable; General Operation - AEG IR 4436 Manual

English
36

Range of remote control

To use the remote control, point it at the remote control sensor on the front of the
device. Make sure there are no obstacles between the remote control and the sensor.
The distance from the remote control to the sensor should not exceed 5 metres. The
angle of the remote control to the remote control sensor should not exceed 30° to
the left, right, up or down.

Connecting the device

NOTE:
• The internet radio does not have an integrated speaker!
• Connect the Internet radio to a stereo system with speakers or use a headset.
• Interference-free operation can only be guaranteed with audio cables of up to
1.5 m.

Connect Audio cable

Connect the internet radio to your playback unit or your amplifier. To do so, you will
need an audio cable with a 3.5 mm stereo jack on 2x Cinch (RCA).
• Plug the 3.5 mm stereo jack into the LINE OUT jack on the back of the device.
• Plug the cinch audio jack into the corresponding jacks of your playback unit or
amplifier.

General Operation

Switch device on/off

• Switch the device on by setting the main switch on the back of the device to "ON".
• To switch off the device, set the main switch to "OFF".

POWER

You can switch between standby and operating mode using the
standby mode, the current time and date is displayed.
POWER button. In