Do you have a question about the MAVEN 125IS and is the answer not in the manual?
Questions and answers
Phyllis
April 29, 2025
When do I know that it is time to change the cartridge
1 comments:
Mr. Anderson
May 15, 2025
The cartridge should be changed when the anti-scale cartridge indicator lights up. It is also recommended to change the descaling cartridge every 3 to 6 months.
Page 1
MAVEN 125IS HOME IRONING STATION INSTRUCTION MANUAL GUIDE D’UTILISATION LE SYSTÈME DE REPASSAGE POUR LA MAISON MANUAL DE INSTRUCCIONES EL SISTEMA HOGAREÑO DE PLANCHADO...
Page 3
THE MAVEN 125IS HOME IRON STATION INSTRUCTION MANUAL ENGLISH...
Page 4
RELIABLE. RIGHT THERE WITH YOU. At Reliable, we do what we love, and take pride in doing it right. You want what’s best for the people, places and things that matter in your life – from where you live to what you wear. So do we. From the start, we approach every product with a craftsman’s attention...
FOR FUTURE REFERENCE READ ALL INSTRUCTIONS BEFORE USE When using your Maven 125IS steam cleaner, basic safety precautions should always be followed. Please read the following instructions carefully as they provide important information concerning how to install, use and care for this product. The appliance is designed for domestic use and may only be operated in accordance with these instructions The appliance generates high temperature steam.
Page 6
• All repairs, including the replacement of the power cord, must only be carried out by Reliable corporation or technicians authorized by Reliable. • This appliance has been designed for domestic use only and may not be used for commercial or industrial purposes.
Page 7
RECOMMENDATIONS DO’S Check that the main voltage stated on the rating plate corresponds to the local electricity supply. Unwind and straighten the power cord and supply cord before use. Place the appliance on a firm and steady surface. The iron must be used and rested on a stable surface Avoid the power cord or steam hose touching the soleplate.
Page 8
CAUTION DONT’S Do not allow children to touch the appliance when ironing. Do not leave the appliance unattended when it is connected to a main supply outlet. Do not use an extension power cord set unless it corresponds with your local manu- facturing standards.
Page 10
MAVEN 125IS KEY FEATURES 1. Function Button 7. Steam Trigger 2. Control Panel 8. Steam Hose 3. Anti-scale Cartridge 9. Soleplate 4. Carry Lock 10. Power Cord 5. Water Inlet Cover 11. Iron Unit 6. Water Tank 12. Base...
CONTROL PANEL No Steam Indicator Steam Level Indicator Anti-scale Cartridge Indicator Temperature Settings Auto Indicator Auto Shut Off Indicator Self-clean Indicator ECO Indicator BEFORE THE FIRST USE Remove any protective films or stickers from the appliance Unwind and straighten the power cord. Immerse new anti-scale cartridge into water for 5 minutes before first use for improved performance (see “ANTI-SCALE CARTRIDGE”)
Page 12
It is simply the water drawing into the unit. As noted above, this chugging may take 10-30 seconds when first using your Maven 125IS. Hold down the steam button to assist with the water drawing process. If your unit requires more water, refill your water tank.
FILLING THE WATER TANK Disconnect the power cord from the electric outlet. Pull out the water tank (Figure 2). Open the water inlet cover and fill tank with water until the maximum level (Figure 3). Put the water tank back and make sure that it is firmly positioned in place (Figure 4).
PROGRAMMED TEMPERATURE Auto Mode The appliance is equipped with a programmed temperature feature which allows it to iron all ironable fabrics without adjusting the temperature of the iron. It is the default mode of this appliance. Fabrics with these symbols are ironable, for example, Polyester, Silk, Viscose, Wool, Cotton and Linen.
Page 15
TEMPERATURE CONTROL SETTINGS Acetate Polyester Cotton Elastane Silk Linen Polyamide Viscose Wool If you are not sure about the fabric is made of, use the auto mode or start ironing at a low temperature. AUTO STEAM FUNCTION The appliance will automatically adjust the steam output to the selected tempera- ture.
Page 16
PROGRAMMED TEMPERATURE Press the function button to turn on the appliance and select your desired temperature. Beeping sounds will be heard when the function button is pressed. Depending on the temperature setting you selected, the corresponding temperature symbol on the control panel will be flashing.
VERTICAL STEAMING You can remove wrinkles from garments, curtains and fabrics in hanging positions. Select your desired steam temperature setting. Hold the iron in a vertical position (Figure 7) 15 to 30 centimeters away from the garment. Press the steam trigger. Warning: Do not apply steam to clothes or fabrics that are being worn by humans or pets.
DRAINING THE WATER TANK Disconnect the iron from the main supply outlet Pull out the water tank (Figure 9). Open the Water Inlet Cover and drain the water tank (Figure 10). Put the water tank back and make sure that it is firmly positioned in place (Figure 11) FIGURE 11 FIGURE 10...
Note: If the anti-scale cartridge is not installed, or installed incorrectly, you will not be able to use the appliance. SELF CLEANING FIGURE 16 This function removes the scale and mineral build-up from the steam chamber. The appliance will remain in the best condi-tion if this function is performed at least once a month or more often, depending on the hardness of water used.
CLEANING AND MAINTENANCE Disconnect the power cord from the main power supply. Use a damp cloth to remove deposits from the soleplate and exterior parts of the iron. Never use sharp or rough objects to remove deposits from the sole plate. STORAGE Make sure the water is completely drained from the water tank Place the iron unit on the base.
TROUBLESHOOTING If your steam station does not work well, check the following points: PROBLEM CAUSE SOLUTION The unit does not work There is not enough heat Wait for unit to heat up It is not plugged in Plug unit in The anti-scale cartridge Install the scale is not installed/installed...
Page 22
Reliable on an exchange basis, and will be either new or refurbished to be functionally equivalent to new. If Reliable is unable to repair or replace a Reliable Product, it will refund the current value of that Reliable Product at the time the warranty claim is made.
Need help?
Do you have a question about the MAVEN 125IS and is the answer not in the manual?
Questions and answers
When do I know that it is time to change the cartridge
The cartridge should be changed when the anti-scale cartridge indicator lights up. It is also recommended to change the descaling cartridge every 3 to 6 months.
This answer is automatically generated