JVC DLA-NX5 Instructions Manual page 70

Video image looks unnatural
Colors are unnatural
Check
Is the color space of the input signal
correctly set?
Is the image correctly adjusted?
Is the AV device or PC properly
connected?
* The video image may appear slightly reddish immediately after starting up. This is not a malfunction.
Video image is fuzzy
Check
Is the focus correctly adjusted?
Is the unit placed too near or too far away
from the screen?
Video image flickers
Check
Do you see horizontally-extended,
overlapping video images?
Are you viewing the video images under
a fluorescent light?
Is "Aperture" set to "Auto 1" or "Auto 2"? Set "Aperture" to "Manual"
Projected image is dark
Check
Is the lamp near exhaustion?
Is the aperture closed?
Is "Lamp Power" set to "Low"?
Video image appears horizontally (vertically) extended
Check
Is "3D Format" set to "Side by Side"?
Is "Anamorphic" set to a setting other
than "Off"?
70
The color may turn out unnatural when the input signal is
different from that in the projector setting.
Set the "Color Space" for "Input Signal" correctly.
Adjust "Color" and "Tint" accordingly.
Connect the AV device or PC properly.
Adjust the focus.
Set the unit at a correct distance from the screen.
In this case, set "3D Format" to "Auto"
This is caused by interference between the 3D glasses with
the flickers of the fluorescent light.
View with the fluorescent light turned off.
Check the lamp time in the "Information" menu.
Prepare a new lamp unit or replace as soon as possible
when the lamp is near exhaustion.
Increase the value of the "Aperture" setting.
Set "Lamp Power" to "High"
Set "3D Format" to "Auto"
Set "Anamorphic" to "Off"
Action
Action
Action
Action
Action
Refer to
P. 51
P. 50
P. 19
Refer to
P. 24
P. 79
Refer to
P. 28
—
P. 46
Refer to
P. 63
P. 46
P. 46
Refer to
P. 28
P. 59