Honeywell C7400 Manual page 6

SOLID STATE ECONOMIZER SYSTEM
1
ON THE 114496 BRACKET, THE MOUNTING HOLES ARE TWO
1
NO. 8-32 TAPPED HOLES. THE 107940 BRACKET IS MOUNTED
WITH A 5/32 (4) DIAMETER HOLE AT THE TOP AND A VERTICAL
5/32 X 5/16 (4 X 8) SLOT AT THE BOTTOM.
Fig. 5. Approximate dimensions of back mounting
bracket for T6031H in in. (mm).
W7459A,C Solid State Economizer Logic
Module
Used with C7400A Sensor or C7660 Sensor and M7415 or
M8405 Actuator to proportion outdoor and return air dampers
for economizer control in commercial HVAC equipment.
Electrical Ratings:
Input Voltage: 24 Vac, 50/60 Hz.
Power Consumption: 5.5 VA.
Relay Contact Rating at 24 Vac: 1.5A run, 3.5A inrush.
Temperature Ratings:
-25°F to +125°F (-32°C to +52°C).
Approval:
Underwriters Laboratories Inc.: Flammability Rating: UL94V-5V.
Specifications:
See Table 3.
Dimensions:
See Fig. 6.
63-2484—03
)
( 1 9
3 / 4
/ 1 6
4 - 3
6 )
( 1 0
OVERALL LENGTH: 5 (127)
OVERALL DEPTH LESS
ADJUSTING DIAL SHAFT:
2-1/8 (54)
M9090A
Fig. 6. Approximate dimensions of W7459 Solid State
Economizer Logic Module in in. (mm).
SPECIFICATIONS: W7212A,C
LOGIC MODULE
Models: W7212A, W7213A, W7214A Logic Modules: for use
with any Honeywell 2-10 Vdc actuator; includes DCV input;
adjustable exhaust fan setpoint.
NOTES:
— All models include a minimum damper position
potentiometer, and setpoints for: occupied/unoc-
cupied control, DCV operation, and DCV maxi-
mum.
— Occupied/Unoccupied overrides minimum
damper position setting when building is unoccu-
pied.
6
7/8 (22)
2-13/16 (71)
4-1/16
(103)
2-3/16
(56)
1-1/4
(32)
5/8
(16)
M9085A