Clock Setting - Kenwood K25MSS19 Instruction Manual

clock setting

When the microwave is connected to the mains power, the LED display will show "0:00", and the
microwave will sound once.
Follow the steps below to set the clock.
1. Press the Clock (1) button and the hour
digits will flash.
2. Press the Numeric (0-9) buttons and enter
the time. For example, to input the current
time 12:30, you need to press "1", "2", "3",
"0". The input hour has to be within 1-23 and
the input minutes has to be within 0-59.
3. Press the Clock (1) button again to complete
the clock setting. ":" will start flashing. The
clock setting is complete.
• This is a 24-hour clock. When the
microwave is connected to the mains
power for the first time or when the
power is resumed after a power
interruption, the LED display will show
"0:00". To re-set the clock, follow the
above 3 steps.
• In the process of clock setting, if the
STOP/Cancel (2) button is pressed or
if there is no operation within 1 minute,
the microwave will go back to the
previous status automatically.
• To find out the current time while the
microwave is in use, press the Clock
(1) button. It will display the current
time for 2-3 seconds, then return to
the remaining cooking time.
18
Time Time
Weight
Cook Defrost
Defrost
Kitchen
Power
Clock
Timer
Popcorn Potato Pizza
Frozen Dinner
Beverage
Vegetable
Plate
2
1