Cross-recessed truss
head screw
Cross-recessed truss
head screw
5)
To mount the bellows, observe the above steps in the reversed order.
Be sure to attach the packing.
•
When dismantling the bellows, DO NOT pull it out by force. Otherwise, the
bellows may rupture.
•
Be sure to attach the packing. Otherwise, the cleanness level will
deteriorate.
CLEAN TYPE SPECIFICATIONS MANUAL
Wiring guide
Set screw
Upper keep plate
Bearing case
Packing
Arm 2 cove r
Fig. 5.5 Bellows (upper)
!
CAUTION
– 30 –
Bellows
Lower keep plate
Packing adhered to the
bearing case
Bellows set ring
No need to be removed
STE 85337-0