Key Mat; Query Whether The Values Should Be Saved In A Series; Query Whether The Values Should Be Printed; Tensile Strength Unit - BAQ alphaDUR mini Manual

Select:
Open dialog
Next scale

10.4.3 Key MAT

In the menu item System / Configuration / Key MAT, the function of the key
MAT in the measurement window is set.
Select:
Open dialog
Next material

10.4.4 Query whether the values should be saved in a series

Under the menu item System / Configuration / Save series query you can
determine if you want to be queried whether the data should be saved when
you close the measuring or statistics (see 6.1 Statistics) window. Select 'Off' to
turn off the query and 'On' to turn it on.

10.4.5 Query whether the values should be printed

Under the menu item System / Configuration / Print values query you can
determine if you want to be queried whether the data should be printed when
you close the statistics window (see 6.1 Statistics). This happens, if the
statistics configuration is switched on.

10.4.6 Tensile strength unit

Under the menu item System / Configuration / Tensile strength unit it can be
selected if the unit of tensile strength should be displayed as Mpa (megapascal)
or N/mm2 (Newton per square millimeter).
If the new hardness scale should be selected in a
dialog.
If the hardness scale should be set automatically to the
next valid scale.
If the new material should be selected in a dialog.
If the material should be set automatically to the
next valid material.
SYSTEM SETTINGS
35