Panasonic SC-PM42DB Operating Instructions Manual page 11

DAB
(continued)
Presetting
Presetting channel
Up to 20 channels can be set.
1 Press [u/t] or [y/i] to select a station.
2 Press [PROGRAM].
3 Press the numeric buttons to select a channel.
4 To preset more stations, press [PLAY MODE] to
select "STATION TUNE" and then repeat steps 1
to 3.
Note
You cannot preset stations when the station is not
broadcasting or when you are selecting a secondary
service.
Selecting a preset channel
1 Press [PLAY MODE] to select "PRESET TUNE".
2 Press [u/t] or [y/i] or numeric buttons
to select a channel.
Listening to the secondary service
Press the [DAB SECONDARY] to select the
secondary service.
" " is displayed if there is a secondary service broadcast.
The secondary services are selected each time the
button is pressed. The primary service is returned to
after the last secondary service.
Display
Press [DISPLAY] to select the display.
The information scroll through the display.
Each time you press the button:
Dynamic label
(information about the
broadcast)
PTY display
(program type)
Ensemble label
(the name of the
ensemble)
Frequency display
Time display
Turning automatic clock
adjustment function on
To adjust the time information during DAB broadcasting
and automatic time adjustment.
1 Press [DAB MENU] to enter menu mode.
2 Within 10 seconds, press [e,r] to select
"AUTO CLOCK ADJ." and then press [OK].
3 Within 10 seconds, press [e,r] to select
"ON ADJUST" and then press [OK].
Select "OFF ADJUST" to turn the automatic clock
PLAY MODE
adjustment function off.
To exit
Press [DAB MENU] again.
DAB
Checking the DAB signal quality
SECONDARY
To improve reception by adjusting the antenna while
monitoring signal quality on the display.
1 Press [DAB MENU] to enter menu mode.
Note
"SCAN FAILED." appears if no stations are
memorized. If this occurs, adjust the antenna and try
Auto scanning or change the Auto scan frequency
range. (➡ page 12)
2 Within 10 seconds, press [e,r] to select
"SIGNAL QUALITY" and then press [OK].
3 Press [e,r] to select the frequency.
Frequency
block
To exit
Press [DAB MENU] again.
Note
In order to enjoy the new stations after adjusting the
antenna, it is necessary to perform Auto scanning and
update the station memory.
Frequency
Reception quality
0 (poor) - 8 (excellent)
DAB
MENU
DAB
MENU
11