Table of Contents
Advertisement
How to use Preferences
There are 9 user-selectable Preferences
so you can customize your 9500i for
your specific driving needs. The buttons
labeled "MRK" and "BRT" are also used to
enter Preferences, REVIEW your current
settings, and to CHANGE any settings as
desired. The word PREF is located on the
top of the detector, and is highlighted in
colored graphics. Pages 16-18 explain each
option in more detail.
How to use Preferences
1
To enter Preferences, press and hold
the "MRK" and "BRT" buttons down for 2
seconds. (The unit will beep twice, and will
Prefs
display the word
.)
2
Then press the "BRT" button to review
the current settings. (You can either tap
the button to change from item to item, or
hold the button to scroll through the items).
3
Press the "MRK" button to change any
setting. (You can either tap the button to
change from setting to setting, or hold the
button to scroll through all the options).
4
To exit Preferences, simply wait 8
seconds without pressing any button, or
press the power button ( ). The unit will
Complete
display
, beep 4 times, and
return to normal operation.
An example
Here is how you would turn PASSPORT's
AutoMute feature off.
1
Enter Preferences by holding both the
MRK and BRT buttons down for 2 seconds.
Prefs
PASSPORT will beep twice and display
2
Then hold the "BRT" button down.
PASSPORT will scroll through the catego-
Pilot
ries, starting with Pilot Light (
), then
sAlrt
SpeedAlert (
), Power-on sequence
PwrOn
(
), then Signal strength meter
Meter
aMute
(
), and then AutoMute (
).
3
Release the "BRT" button when
PASSPORT shows the AutoMute item. Since
the factory setting is for AutoMute to be on,
aMute ON
PASSPORT will display
.
(If you accidentally don't release the "BRT"
button in time, and PASSPORT goes to the
next category, simply hold the "BRT" button
down again, and after PASSPORT scrolls
through all categories, it will begin again at
the top of the list.)
4
Press the MRK button to change from
aMute ON
to
aMute OFF
.
5
To complete choosing your Preferences,
simply wait 8 seconds without pressing any
buttons, or press the power button ( ).
Complete
PASSPORT will display
, beep 4
times, and return to normal operation.
14
Overview of Preferences
Press the BRT button
to go from one category
to the next
PILOT LIGHT
(Power-on indication)
.
SPEEDALERT
POWER-ON SEQUENCE
SIGNAL STRENGTH METER
AUTOMUTE
AUTOVOLUME
*
Restoring the Factory Default Settings
To restore your PASSPORT to its
original factory settings, press
and hold the "SEN" and "BRT"
buttons while turning the power
Reset
on. A
message will be
displayed, accompanied by an
audible alert, acknowledging
the reset.
Press the MRK button
to change your setting
within a category
Pilot HWY
* Full word: Highway or Auto or City
Pilot H
Letter: H or A or C
Pilot H.>
Letter, with scanning dot
Pilot V
Vehicle voltage
Pilot SPD
Vehicle speed
sAlrt ON
* Displays current speed during alert
sAlrt OFF
SpeedAlert feature off
PwrOn STD
* Standard power-on sequence
PwrOn FST
Fast power-on sequence
Meter STD
* Standard signal strength meter
Meter EXP
ExpertMeter mode
Meter SPC
SpecDisplay mode
aMute ON
* AutoMute on
aMute OFF
AutoMute off
aVol ON
* Audio alerts increased automatically
aVol OFF
Audio alerts are controlled manually
UNITS
Units ENG
* Speed/distance in English units
Units MET
Speed/distance in Metric units
Voice ON
VOICE
* Voice announcements on
Voice OFF
Voice announcements off
BANDS
Bands DFT
* Default settings
Bands MOD
Bands have been modified
Turn bands on/off by
pressing the Mute button
X
ON
OFF
or
(default is on)
Ku
ON
OFF
or
(default is off)
K
ON
OFF
or
(default is on)
Ka
ON
OFF
or
(default is on)
POP
ON
OFF
or
(default is off)
SWS
ON
OFF
or
(default is off)
LSR
ON
OFF
or
(default is on)
15
Hide quick links:
Advertisement
Table of Contents
