Table of Contents
Advertisement
74
Seats and Stowage
Memory for the seat
Memory buttons
Memory for the seat offers the possibility to store the individual seat and
external mirror position. An individual position can be allocated to each of
the three memory buttons
the appropriate memory button
matically move into the position allocated to this button.
ON/OFF switch
A
If you press switch
(increased switch position), the memory buttons
E
no longer operate. You can now adjust the seat electrically without using
A
the memory buttons
. After pressing switch
D
be reset with the memory buttons. If you had already started an operation
to retrieve the settings, this operation is not continued.
If the car is used only by one driver, it is not necessary to store particular
settings in this case, we recommend that you press the button
(increased switch position).
Fig. 56 Driver seat:
Memory buttons and
ON/OFF switch
A
⇒ fig.
56, that is three in total. On pressing
D
A
the seat and external mirror will auto-
D
A
once again, the seat can
E
Emergency Off
If you operate any button or the switch ON/OFF switch of the driver seat,
you can interrupt the setting operation at any time in an emergency.
Storing and retrieving settings
Storing seat and exterior mirror settings for driving forward
– Switch on the ignition.
– Adjust the seat ⇒ page 73.
– Adjust both exterior mirrors ⇒ page 69.
– Press the desired memory button
pressed for about 3 seconds until an audible signal confirms
that the setting has been stored.
Storing exterior mirror setting for reversing
– Switch on the ignition.
– Turn the exterior mirror control to position
fig.
53.
A
– Engage reverse gear.
D
– Move the right exterior mirror into the desired position
⇒ page 69.
– Press the desired memory button
pressed for about 3 seconds until an audible signal confirms
A
E
that the setting has been stored.
A
and hold the button
D
⇒ page 69,
A
and hold the button
D
Advertisement
Table of Contents
