Table of Contents
Advertisement
Depending on the equipment installed in the vehicle, the information
appears in the display of the counter for distance driven or in the informa-
tion
display⇒ page 16, fig.
Service Interval Display
If the due date for the service is reached, the following text appears after
switching on the ignition:
in the display of the trip counter
Service 1 500 km
in information display
SERVICE in 1500 km
Prior to the due date for the service the kilometre readout decreases in
steps of 100 km. As soon as the due date for the service is reached, the
following text appears:
in the display of the trip counter
Service
in information display
SERVICE NOW
The display disappears within 20 seconds after starting the engine. The
trip counter is also displayed after pressing the reset button of the trip
counter (for more than 1 second).
Resetting Service Interval Display
We recommend having this resetting performed by a specialist garage.
The specialist garage:
•
resets the memory of the display after the appropriate inspection,
•
makes an entry in the Service schedule,
•
affix the sticker with the entry of the following service interval to the
side of the dash panel on the driver's side.
Using the system
Safety
5.
Driving Tips
Instruments and Indicator/Warning Lights
It is also possible for you to reset the Service Interval Display with the
A
⇒ page 16, fig. 5
reset button
B
with fixed service intervals - QG2).
•
Switch off the ignition (if not already off), press the reset button
hold it down.
•
Switch the ignition on and release the reset button
Service or service now appears in the display.
•
Turn the button for resetting the clock
reset.
Caution
We recommend that you do not reset the Service Interval Display yourself
otherwise this can result in the service interval display being incorrectly
set, which may also result in problems with operation of your vehicle.
Note
•
Never reset the display between service intervals otherwise this may
result in incorrect readouts.
•
Information is retained in the Service Interval Display also after the
battery of the vehicle is disconnected.
•
It is necessary to re-code the Service Interval Display if a new instru-
ment cluster is installed during repair work. This work is carried out by a
specialist garage.
•
After resetting the display with flexible service intervals (QG1) using
A
the reset button
, the data displayed are the same as for a car with fixed
B
service intervals (QG2). We therefore recommend having the Service
Interval Display reset only by a Škoda Service Partner who is familiar with
the procedure for resetting the display with a vehicle system tester.
•
Please refer to the brochure Service schedule for extensive informa-
tion about the service intervals.
General Maintenance
Breakdown assistance
as follows (does not apply to models
A
B
A
. The text
B
A
to the right - the display is
A
Technical Data
17
and
Advertisement
Table of Contents
