Driver Installation; Pen Nib Replacement; Charging The Pen - GAOMON PD1560 User Manual

1.4 Driver Installation

1.4.1 OS Support
Windows 7 or later，macOS 10.12 or later
1.4.2 Install via Download
Please download the driver from our website: www.gaomon.net
After finishing installation, you can find the grey driver icon in the system tray
area, which means the driver was installed successfully; when you connect the
tablet to computer, the icon will become orange , which means the driver has
already recognized the tablet and you can start using it now.
Notice：
1. Before installing, you need to uninstall other driver of similar products, including
the old driver of this product.
2. Before installing, please close all graphics software and anti-virus software to
avoid unnecessary mistakes.

1.5 Pen Nib Replacement

1. The nib will wear off after using for a long time, then you need to replace a new
nib.
2. Unscrew the pen holder and take out a new nib.
3. Insert the old pen nib into the hole at the bottom of the pen holder and tilt the
pen to pull out the nib.
4. Insert a new pen nib into the stylus and push the nib until it stops.

1.6 Charging the Pen

1. When the indicator on the pen shows orange, it means the voltage of the pen is
low, then you need to charge the pen.
2. Charge the pen with the attached charging cable. Insert one end of the charging
cable into the rear of the stylus charging port, the other end can be connected to a
computer, power supply or power bank.
23
7 / www.gaomon.net