Table of Contents
Advertisement
ASSEMBLY INSTRUCTIONS
STEP II:
Wheels and Leg Extenders to Cart
Turn assembly upside down. Align the bottom shelf side holes with leg holes.
Attach sides of bottom shelf to four legs with (4) M6x13 screws, M6 lock
washers and M6 flat washers. Fully tighten all shelf screws, top and bottom.
Remove hitch pin, nut and washer from axle. Insert axle rod through a wheel,
through both right leg axle holes, and through other wheel.
Attach with (1) Axle washer, nut and hitch pin. Assemble wheels with "cone"
side against legs.
Hammer leg extenders onto left legs.
Leg Extender Rear
Hitch
Pin
Nut
Axle Washer
Leg Extender Front
7
Axle Rod
Advertisement
Table of Contents
