Advertisement
Quick Links
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2020 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product
described herein. Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this
product. Failure to do so can result in
serious injury. SAVE THIS MANUAL.
20l
Advertisement
Related Manuals for Bauer 20204L-B
Summary of Contents for Bauer 20204L-B
- Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
- Page 2 table of contents Safety ..........3 Operation ........5 Specifications ......3 Maintenance ........7 Setup ...........2 Warranty ........8 WarninG SyMBOLS anD DEFinitiOnS This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
- Page 3 Do not look into laser. Do not point Do not attempt to charge batteries laser at persons or animals directly or Have the Laser Level calibrated by indirectly off of reflective surfaces. a qualified technician every year Performance of this Laser Level may to maintain accurate results.
- Page 4 Setup - Before use: read the EntirE iMpOrtant SaFEty inFOrMatiOn section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Functions power Switch t-Edge alignment Bubbles Laser aperture L-Edge Bottom of Level Battery Latch...
- Page 5 Operating instructions read the EntirE iMpOrtant SaFEty inFOrMatiOn section at the beginning of this manual including all text under subheadings therein before set up or use of this product. General Operation Install batteries as described in c. If on the wall, align the Level so "Battery Replacement"...
- Page 6 To lay tiles on the floor: To check the alignment of a row of tiles, place L-Edge at the corner of a tile. a. Position Level in a corner so that laser lines run parallel to the reference lines as shown in Step 3. b.
- Page 7 Maintenance and Servicing procedures not specifically explained in this manual must be performed only by a qualified technician. cleaning, Maintenance, and Lubrication Wipe unit with a dry, lint-free cloth. Other than the batteries, there Do not use solvents or abrasives. are no replaceable parts on this unit.
- Page 8 Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.