en Cleaning and maintenance
Terminating the programme
(Reset)
Open the door.
1.
p r o g r a m m e
T e r m i n a t i n g t h e
Press the START button )" and
2.
hold for 3 seconds
The display window at the top @
and the front display * ): show:
"Program was terminated".
Close the door.
3.
The programme sequence lasts
approx. 1 min. The display window
at the top @ shows: "Finished".
Open the door.
4.
Switch off ON/OFF switch (.
5.
Close the door.
6.
* depending on the features of your
dishwasher
Changing the programme
When the START button )" has been
pressed, the programme cannot be
changed. The only way a programme
can be changed is by Cancel
programme (Reset).
34
2
Cleaning and
maintenance
A regular inspection and maintenance
t e n a n c e
C l e a n i n g a n d m a i n
of your machine will help to prevent
faults. This saves time and prevents
problems.
Overall condition
of the machine
Check rinsing compartment
■
for grease and limescale deposits.
If you find such deposits:
Fill detergent dispenser 9: with
■
detergent. Start the appliance
without utensils in the programme
with the highest rinsing temperature.
:
Warning
Health hazard due to detergents
containing chlorine!
Always use chlorine-free detergents.
Clean the appliance with
detergents/appliance cleaners which
are particularly suitable for use with
dishwashers.
To extend the life of your appliance,
■
clean the appliance regularly with a
special dishwasher detergent.
To ensure that the door seal always
■
remains clean and hygienic,
regularly clean it with a damp cloth
and a little washing-up liquid.
If the appliance is switched off for a
■
prolonged period, leave the door
ajar to prevent the formation of an
unpleasant odour.