Diagrams of the control panel and the power supply. Pull out the mains plug interior of the appliance can be found in or switch off the fuse. Turn off the tap. the envelope at the front. Disposal Individual positions are referred to in the text.
from : to : Salt is not required at the set value : – Find out about the hardness value of your tap water. Your water utility company will help you with this. – Set value can be found in the water hardness table.
You will destroy the water The water is displaced and runs out. softening system. As soon as the salt refill indicator @ on – To prevent corrosion, always refill with the fascia is lit, top up the salt. salt immediately before switching on the appliance.
. This is the factory As soon as the rinse-aid refill indicator H setting : is lit on the fascia, there is still a rinse-aid Do not change the amount of rinse aid reserve of 1 – 2 rinsing processes. Refill unless streaks (select lower setting) or with rinse aid.
Very small utensils should not be washed wash cycle. Even some types of glass in the machine, as they may fall out of the (e.g. crystal glass objects) may turn cloudy baskets. after many wash cycles.
The drawer can be taken out. Folding spikes * * depending on model The spikes can be folded down to improve Heavily soiled utensils (pans) should arrangement of pans, bowls and glasses. be placed in the bottom basket. The more powerful spray jet provides a better dishwashing result.
Small accessories holder * – To lower the basket, press in the left and then the right lever on the outside * depending on model of the basket. In doing so, hold the Light-weight plastic accessories, e.g. cups, sides of the basket along the upper lids, etc.
Adding detergent Detergent – If the detergent dispenser 1j is still closed, press the lock 9" to open the You can use tablets as well as powder detergent dispenser. or liquid detergents for dishwashers, but Pour detergent into the dry detergent never use washing up liquid.
ã= the detergent may stick. Warnings – If you switch from combined – Do not place small parts for washing in detergents to solo detergents, ensure the tablet collecting tray 1:; this that the water softening system and prevents the tablet from dissolving amount of rinse aid have been set to evenly.
Overview of programmes The max. possible number of programmes is illustrated in this overview. The corresponding programmes for your appliance can be found on the fascia. Type of utensils Type of soiling Programme Possible additional Programme sequence options Prerinse pots and pans, very adhesive burned- ±...
Half load * The Aqua sensor is used according to the programme. If the Aqua sensor is active, If you have only a few items to wash (e.g. “clean” rinsing water can be transferred to glasses, cups, plates), you can switch to the next rinse bath and water consumption “half load”.
: If the appliance is installed at eye-level, – Press P + or – button until the with flush furniture front, the light point is displayed time corresponds with your not visible.
Otherwise, expansion (pressure) indicated on the digital display. may cause the appliance door to – Release both buttons. spring open or water to run out of the The LED for button # flashes and the appliance. digital display h displays the factory –...
Regularly wipe the front of the appliance the digital display h. and fascia with a damp cloth; water and a little washing up liquid are adequate. Do To change the setting, not use sponges with a rough surface or –...
Spray arms The filters 1R keep large foreign objects Limescale and contaminants in the rinsing in the rinsing water away from the pump. water may block nozzles and bearings on the spray arms 12 and 1B. These foreign objects may occasionally block the filters.
(as illustrated) until it clicks, then grip first run the Abort programme function the cover by the lug and first pull it (Reset). upwards until it resists and then pull it (See chapter entitled “Dishwashing”) out forwards.
– The mains fuse has tripped. – Clean filter in the supply hose. – The appliance plug has not been inserted. – The appliance door has not been shut properly..changing settings A setting cannot be changed, a programme starts.
Contact the detergent manufacturer, of the machine. Remedial action is not in particular if: possible. – the utensils are very wet at the end of Knocking/rattling noise during rinsing the programme. – Spray arm is striking utensils. – limescale forms.
(1) and the production date following paragraphs or in the installation (FD = 2) which can be found on the rating instructions. plate 9* on the appliance door. Install the appliance in the correct sequence: –...
ã= cold water; hot water max. temperature Warning 60 °C. If the appliance is not in a cavity and a Installation side panel is accessible, the door hinge area must be covered at the side for The required installation dimensions can reasons of safety (risk of injury).
It is recommended to have a water Fresh water connection temperature (temperature of the incoming – Connect the fresh-water connection to water) of at least 40 °C and no more than the tap according to the installation 60 °C. instructions with the enclosed parts.
– Loosen the fastening screws under the Protection against frost worktop. If the appliance is in a room where there is – If fitted, remove the base panel. a risk of frost (e.g. holiday home), empty – Pull out the appliance, carefully pulling the appliance completely (see the hose behind.
Please dispose of the individual parts separated according to type. Please ask your dealer or inquire at your local authority about current means of disposal. Packaging All plastic parts of the appliance are identified with internationally standardised abbreviations (e.g.