Advertisement
ASSEMBLY
Unpacking and assembly
1. Check that the package includes all parts described in this instruction
manual before starting.
2. Fit the stick handle by carefully inserting it into the main body.
3. Remove the supplied screws, insert the handle into the main unit, install the
screw and tightening the handle, by a screwdriver (flat head). (screwdriver
not included) (Fig.1)
4. Insert the floor nozzle into the main body. (Fig.2)
5. Insert the handheld unit into the main body. Make sure to hear the "click"
sound such that it locks into the main body. (Fig.3)
6. Pick up and place the vacuum cleaner on the stand base provided. It can
secure the product to stand firmly in position. (Fig.4)
7. Place the sifter on top of the measuring cup. There is two recessive slots at
the bottom of measuring cup, then insert either the slot into the post of the
stand base for storage purpose.
Fig.1
Fig.2
Supplied
screw
Main unit
8
Fig.3
Fig.4
Water line
Advertisement
