Advertisement
CLEANING AND STORAGE
Floor nozzle
• To take the floor nozzle out, lay the vacuum cleaner flat on the floor. Press and
hold the floor nozzle release buttons at the same time as indicated below and
pull out the floor nozzle. (Fig.27)
• Carry out the cleaning and maintenance if any waste or hair has tangled
in the brush.
Press
Fig.27
Front view
Rear view
Regular Maintenance
• Slowly rotate the brush manually and remove any foreign objects tangled
around the roller brush. (Fig.28)
• Check and clean the vacuum channel of floor nozzle brush and the main stick
body (above the reservoir) occasionally. Remove the blockage and take out
any waste. (Fig.29 & 30)
Fig.28
Rotate
Press
Fig.29
(On floor nozzle brush)
18
Fig.30
(On top of reservoir)
Advertisement
