Philips BVP528 Manual page 4

92,5mm
30mm
• In case of using only one screw, use uniquely the position 1. Never use
one single screw in Pos.2 or Pos.3
• If using the Pos.2, the second screw must be in the opposite Pos. 2.
• If using the Pos.3, the second screw must be in the opposite Pos. 3.
1
Attention: do not hold the luminaire by the cable gland
4
FLAT WASHER NEEDED
ACCORDING TO
DIN9021
A cable can be used as second security system.
Section has to be enough for the installation and support
environmental conditions (e.g. sheathed steel)
The fasteners have to resist environment corrosion.
Stainless steel screws not recommended and protective coating might be
applied.
2
25
5
4/24
2XM20 SCREW
100
30
If luminaire placed as
shown, rotation angle
limited (only HGB
version, BV version no
limitation):
1XM20 SCREW
In case of using only one fixation point
and if the luminaire is higher >3m, the
use of a 2nd fixing security system is
needed
3
50
17

28º<angle<76º

angle<28º or >76º