Controls - Minelab GPX 6000 Pocket Manual

Controls

1
2
3
4
1. Bluetooth® Control
Enables Bluetooth® for
connection of wireless
headphones.
Initiates Bluetooth® pairing
mode for connecting Bluetooth®
headphones (long-press for at
least 2.5 s).
2. Backlight Adjust
Cycles through the backlight
brightness settings — high,
medium, low and off.
3. Power On/Off
Turns the detector on and off.
Restores factory default settings
(press and hold from off for at
least 7 s).
4. Sensitivity Adjust
Adjusts the sensitivity level.
5. Ground Type
Toggles between Difficult and
Normal Ground Type.
Toggles between the Threshold
On/Off settings (long-press for
at least 2.5 s).
6. Noise Cancel
Initiates the Noise Cancel
process.
When a Double-D coil is
connected, toggles between the
Double-D Modes — EMI Cancel
and Conductive Ground Cancel
(long-press for at least 2.5 s).
7. Volume Adjust
Adjusts the audio Volume Level.
8. Quick-Trak
Press and hold Quick-Trak
Ground Balance to conduct a
Ground Balancing operation.
Return to Contents
7
6
5
8