Advertisement
Quick Links
Beam Antenna RST710
1 x Bracket
2 x 'U' Bolts
4 x Nuts
4 x Small Screws
The antenna can be installed using either a pole mount or bracket mount provided.
1.
Applications
LARGE VESSELS
For more information on Iridium Antenna Guidelines visit our website at www.beamcommunications.com/antennainstallationguide
Pole Mount Assembly
1.
Feed the cable through the pole
2.
Feed the cable through the base plate
3.
Connect the antenna cable to the antenna
4.
Screw the base to the antenna housing using screws provided
5.
Screw the pole into the base to secure the pole to the antenna
Bracket Mounting Assembly
1.
Attach the antenna bracket to the base of the antenna housing using the
screws provided
2.
Using the "U" bolt provided, the antenna can be affixed to either a horizontal
or pole mount.
2.
LEISURE CRAFT
Horizontal Pole
Mount
VEHICLES
1 x Antenna
1 x Antenna Base
1 x Pole
(305mm/12in. length)
Vertical Pole
Mount
TRUCK
Advertisement
Related Manuals for Beam RST710
Summary of Contents for Beam RST710
- Page 1 Beam Antenna RST710 1 x Antenna 1 x Bracket 2 x ‘U’ Bolts 4 x Nuts 1 x Antenna Base 4 x Small Screws 1 x Pole (305mm/12in. length) The antenna can be installed using either a pole mount or bracket mount provided.
- Page 2 Antenna installation is critical for optimum performance of your Iridium service. Installation Guidelines To ensure maximum performance of the antenna system and to maximise availability and reliability of service the antenna must; • have a clear line of site to the sky •...