Epson PhotoPC L-500V Reference Manual page 58

In P.I.F. mode, you use frames that you have previously loaded into the camera. You can select
the frame before you take the picture, or add it to a picture saved in your camera before you print.
To take a picture with a frame:
1. Turn the Mode dial to
2. Press the P.I.F. button. The first frame stored in the camera is displayed.
If you want to select a frame stored on the memory card, move the joystick to r after pressing
P.I.F. button.
the
3. Select the desired frame by moving the joystick to u or d, then press the OK button.
Note:
Most frames are available in both horizontal and vertical designs. Make sure you choose the right
orientation for the picture you want to take.
4. The selected frame is displayed on the LCD screen. You can now take the picture and center
it in the frame. (See Chapter 2, "Taking Photos and Videos," for instructions.)
automatic, manual, or continuous shooting mode.
Using PRINT Image Framer (P.I.F.)
58