Epson PhotoPC L-500V Reference Manual page 71

Is the Mode dial set to the
correct mode?
Is the photo image number
on the LCD screen 0?
Is the battery/memory card
cover open?
Do you have a memory card
correctly installed?
The camera does not react when you press any buttons
Cause
Is the camera light flashing?
See Chapter 2, "Taking Photos and Videos."
This means the memory card is full. Transfer the photos to a
computer, then delete them from the camera to free up space. See
"Deleting Photos" on page 53 for details.
Close the battery/memory card cover and try pressing the
shutter button again.
Make sure your memory card is correctly installed in the camera
or it can't store any photos you take.
What to do
Turn the power off, and then turn it on again. If the power does
not turn off, remove the battery, reinstall it, and turn the power
on. Also make sure the memory card is installed correctly. If the
light is still flashing, contact Epson as described on page 80.
Maintenance and Troubleshooting
71