Page 1
We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for choosing Hampton Bay!
Table of Contents Table of Contents............2 Swivel Rocker Chair Assembly..........5 Safety Information ............2 Care and Cleaning............10 Product Caution ..............2 Safety Warnings ..............2 Warranty ................ 2 What is Covered ..............
Pre-Assembly PLANNING ASSEMBLY Read all instructions before assembly. To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard. NOTE: More than one person may be required to assemble this product. HARDWARE INCLUDED NOTE: Hardware not shown to actual size. Part Description Quantity...
Page 4
Pre-Assembly (continued) SWIVEL ROCKER CHAIR PACKAGE CONTENTS Part Description Quantity Seat Assembly Left Arm Right Arm Support Seat Post Decorative Plastic Cover D130 Base Assembly...
Page 5
Swivel Rocker Chair Assembly Connecting the swivel rocker chair seat assembly to the swivel rocker chair legs and support Place the right arm (C) onto a non-abrasive surface, such as a carpet. Insert the support (D) into the arms (B and C). At the front of the seat assembly (A), fasten the arms (B and C) to the seat assembly (A) by using M6x35 bolts (AA) and d6.5xD13x1.0 washers (DD).
Page 6
Swivel Rocker Chair Assembly (continued) Connecting the swivel rocker chair seat assembly to the swivel rocker chair arms Fasten the arms (B and C) to the back of the seat assembly (A) by using M6x35 bolts (AA) and d6.5xD13x1.0 washers (DD). NOTE: Loosely tighten all the bolts using the hex wrench (HH).
Page 7
Swivel Rocker Chair Assembly (continued) Connecting the swivel rocker chair seat post to the swivel rocker chair seat assembly Turn the swivel rocker chair upside down and place the seat post (E) onto the brace of the seat assembly (A). Fasten them together by using M8x45 bolts (BB), d8.5xD17x1.6 washers (CC and FF) and M8x1.25 jam nuts (GG).
Page 8
Swivel Rocker Chair Assembly (continued) Connecting the swivel rocker chair decorative plastic cover to the swivel rocker chair base assembly Place the decorative plastic cover (F) on the base assembly (G).
Page 9
Swivel Rocker Chair Assembly (continued) Connecting the swivel rocker chair seat post to the swivel rocker chair base assembly Insert the seat post (E) into the hole located in the center of the base assembly (G). Fasten them together by using M6x35 bolts (AA) and d6.5xD30x2.0 washers (EE).
Swivel Rocker Chair Assembly (continued) Tightening the bolts Once all of the bolts are in place, fully tighten the bolts. Ensure all connections are secure before use. Care and Cleaning For best results, clean the set with a damp cloth and dry thoroughly. This will help prevent mildew by removing dirt particles that may accumulate.
Page 11
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service. 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM Retain this manual for future use.
Need help?
Do you have a question about the RTS877Z and is the answer not in the manual?
Questions and answers