Clas Ohlson ETW39W-UK Quick Start Manual

Electric Drying Rack
Art.no 18-4291 Model ETW39W-UK
34-2035 ETW39W
Please read the entire instruction manual before use and save
it for future reference. We reserve the right for any errors in text
or images and for making any necessary technical changes to
this document. If you should have any questions concerning
technical problems please contact our Customer Services.
Safety
• This drying rack must not be used by anyone (including
children) suffering from physical or mental impairment.
This drying rack should not be used by anyone without
sufficient experience or knowledge if they have not
been instructed in its use by someone who will take
full responsibility for their safety.
• Never let children play with the product.
• Unplug the drying rack when you have finished using it.
• Check that your power supply is 230 V and that the drying
rack is connected to an earthed socket.
• Do not use the drying rack if the power lead or plug is
damaged. The mains lead should be checked regularly.
If the mains lead is damaged it must only be replaced
by the retailer or qualified service technician.
• This drying rack is only intended to be used and
stored indoors.
• Do not open the casing. Certain components inside the
casing are exposed and carry dangerous electrical current.
Contact with these could result in electric shock.
• The drying rack should only be repaired by qualified
service personnel.
• The drying rack must not be taken apart or modified.
• WARNING: This appliance is intended only for drying
textiles washed in water.
Product description
Electric Drying Rack. Folding paint finished steel frame.
Height: 84 cm. Open length: 100 cm, approx. 7.5 m of drying
length. Width: 58 cm. 230 V / 130 W. IP34.
GREAT BRITAIN • for consumer contact, please visit www.clasohlson.co.uk and click on customer service.
Mounting the wall brackets
1. First, mark the position of the bracket holes on the wall.
2. Drill holes suitable for the wall plugs.
3. Insert the wall plugs into the wall.
4. Hold the brackets in front of the holes and screw
them in place.
5. Hang the drying rack on the brackets. Make sure
the rack is turned off before you hang it.
Use
1. Open the drying rack and place it on a flat surface.
2. Plug the drying rack into a wall socket.
3. Turn the drying rack on.
Care and maintenance
Clean the drying rack by wiping it with a soft, dry cloth.
Do not use solvents or abrasive cleaning agents.
Disposal
Follow local ordinances when disposing of this product.
If you are unsure of how to dispose of this product, please
contact your local authority.
Specifications
Power supply 230 V AC, 50 Hz
Power 130 W