Advertisement
12. Click
to close the EPSON TWAIN 3 Setup window.
OK
The Screen Calibration window appears. You must calibrate your
screen and scanner to reproduce images closely matching the
originals.
13. Move the slider in the Screen Calibration window to the right or
left until the shades of the horizontal gray stripes appear similar.
View the screen from a short distance. The gray stripes will not
perfectly blend together; however, try to make the two tones
match as closely as possible.
14. Click
to register the calibration setting.
OK
Installing the Creative Software with Windows 98
1. To install the creative software that came on your scanner
CD-ROM, click
(where
is your CD-ROM drive letter) and click
D
2. After a moment, you see the EPSON installer Main Menu. Click
Creative Software
click
Install
3. Follow the instructions on screen and in "Install the Creative
Software" beginning on page 28 of your Scanner Basics book.
Note: Some of the creative software installers require you to restart
your system. To return to the EPSON installer, repeat the steps above.
EPSON is a registered trademark of SEIKO EPSON CORPORATION. Perfection is a
trademark of Epson America, Inc.
General Notice: Other product names used herein are for identification purposes only and
may be trademarks of their respective companies.
Copyright © 1998 by Epson America, Inc.
Torrance, California, USA
and
Start
, select the software you want to install, and
.
. At the prompt, type
Run
4
D :\EPSON
.
OK
CPD 7661
10/98
Advertisement
