Advertisement
7. You see the Open dialog box. Select your CD-ROM drive letter in
the Drives pull-down list. In the Folders box, click the
folder and then click the
When the folder path reads
CD-ROM drive letter), click
8. You see the New Hardware Found dialog box asking for the
location of an .inf file. Make sure the Copy files from box shows
d :\twain\win98
click
.
OK
9. You see the EPSON TWAIN 3 Setup window.
Note: If you don't see the EPSON TWAIN 3 Setup window, it
may be behind the Main Menu screen. Hold down the
and press
Tab
Make sure that
Perfection 636
the Scanner Basics book for troubleshooting instructions.)
10. Place a document face down on the scanner's document table
glass.
11. Click
Test
document and if everything is properly installed and connected,
an image appears in the window.
win98
(where
d
to move the window to the front.
is selected in the Interface pull-down list and
SCSI
appears in the Port Id list. (If not, see page 68 of
to check the connection. The scanner scans the
folder.
d :\twain\win98
.
OK
is your CD-ROM drive letter). Then
3
twain
Select the
twain\win98
folder
Select your
CD-ROM
drive letter
(where
is your
d
Alt
key
Advertisement
