Advertisement
Note: If you press
. If you have any other problems, see page 68 of your
Cancel
Scanner Basics book for troubleshooting solutions.
2. Insert the scanner CD-ROM in the CD-ROM drive. The
EPSON screen appears, followed by the License Agreement. Read
the agreement, then click
Note: If the CD-ROM doesn't start automatically, click
, and type
Run
letter). Then click
3. When the Setup reminder screen appears, verify you've installed
the hardware correctly, then click
4. When the Scanner Software Installation screen appears, click
. The LaserSoft Scan Software for EPSON Perfection 636
Install
is installed first. Follow the instructions on screen to install the
software. When that installation is complete, EPSON TWAIN is
installed (you won't see any activity on screen).
5. After the software is installed, you must restart your computer
when prompted. Be sure to leave the CD-ROM in the drive. After
you restart, you see this prompt. Click
6. You see this dialog box asking you to provide the location of the
EPSON TWAIN files on your CD-ROM. Click
by mistake, click
Next
AGREE
(where
D :\EPSON
.
OK
2
, then click
Back
to continue.
is your CD-ROM drive
D
.
Yes
.
OK
,
Start
.
Browse
Click
Browse
Advertisement
