Repair Instructions; Dismantling The Engine - McCulloch M125-97FH Workshop Manual

Dismantling the Engine

Pull up the lever for engaging the blades.
IMPORTANT!
Hold the battery cable screws in place so that the
electrodes are not strained.
Loosen the battery strap and detach the cable connections.
Remove the cable connecting the starter relay to the starter.
Separate the connector.
Remove the side plates.
Loosen the screws. Twist out the back of the plate 45°.
Remove the front edge of the plate.
8 – English

REPAIR INSTRUCTIONS

Loosen the cable bracket from the engine.
Remove the fuel tank, see "Fuel Tank".
Remove the clip holding the throttle and choke cables.
Release the cable from its mounting.
Remove the plate over the engine by loosening the four
screws in the frame, two on each side. The engine can be
removed without lifting off the plate.