Advertisement
17. Place the holder in the up
position and slide the holder into the
seal into the body of the C-VFF30.
Looking through the fuel port,
position the seal above the cavity of
the seal recess.
18. Coat the installation pin C-P1-
14235 with petroleum jelly and push
the seal through the holder and into
the seal recess of the C-VFF30 body.
Look through the fuel port to ensure
the seal is seated in the seal recess
and that the groove in the seal is
visible.
19. Use needle nose pliers to hold
C-W1-42 seal retainer washer.
20. Insert seal retainer washer in
slot to hold the lip seal in place.
Page 8 of 14
C-VFF30 Repair Kit Instructions (Form 103-2)
Advertisement
