Advertisement
33. Tighten screws, alternating from
side to side on opposite sides of the
cover until all screws are solidly set.
Torque to 65+/-5 in-lbs.
34. Lift lever C-L1-39 to ensure it
moves properly and verify that the
C-P1-15 lever control pin follows lever
travel.
35. Turn diaphragm so the raised lip
is downward (see illustration on page
2) place on the Lockoff and rotate to
position so the screw hole pattern
aligns with the holes in the body
(there is only one position in which
the holes will line up).
36. Place cover in correct position and
insert screws C-S1-15265-001.
Page 12 of 14
C-VFF30 Repair Kit Instructions (Form 103-2)
Advertisement
