Advertisement
25. C-S2-40 spring ready to be
fastened in place. Be sure the arc
in the center faces upward (see
illustration in step 26 below).
26. Replace spring and fasten in
place by C-S1-15265-002 screw
(8-32). Align the tip of spring (over
valve) and center between the 3
guide fins as shown in illustration.
Tighten screw to 30 +/-3 in-lbs.
27. When spring is in place, lift
slightly to ensure it can move freely.
28. Insert C-S7-3 screen and filter
C-F1-10 into recess.
Page 10 of 14
C-VFF30 Repair Kit Instructions (Form 103-2)
Advertisement
