Ducting To Finished Areas (Optional); Attaching Duct Collars - Santa Fe Compact2 Installation & Operation Instructions

Ducting To Finished Areas (Optional)

Attaching Duct Collars

Return Air Inlet
An 8" diameter duct collar and a front panel are attached to the unit.
Supply Air Outlet
The back panel of the dehumidifier can be rotated to allow for horizontal flow through or vertical flow through of the
supply air.
• Horizontal Flow Through
The unit ships configured for a horizontal flow through. An 8" diameter duct collar is attached to the unit.
• Vertical Flow Through
Remove the exhaust panel. Rotate the panel so the exhaust collar is located on the top of the unit. Align screw holes and
snap the panel onto the base. Secure the exhaust panel to the base by replacing the six screws.
Horizontal Flow Through
Horizontal Flow Through
(End Discharge)
(End Discharge)
A
A Air Flow
A 8" Return Air Inlet
A
8" Return Air Inlet
B 8" Supply Air Outlet
B 8" Supply Air Outlet
Front View
Front View
A
A
6
Santa Fe Compact2 Installation & Operation Instructions
Air Flow
Rear View
Rear View
B
B
Vertical Flow Through
Vertical Flow Through
(Top Discharge)
(Top Discharge)
B A
B A
Front View
Front View
A
A
B
B
Air Flow
Air Flow
A 8" Return Air Inlet
A
8" Return Air Inlet
B 8" Supply Air Outlet
B 8" Supply Air Outlet
Top View
Top View
B
B
www.Santa-Fe-Products.com | 1-800-533-7533
Rear View
Rear View