Voice Controls; Remote Control Mode Error; Remote Control Mode Reset; Selecting The Voice Service (When It Is Not Selected) - Panasonic TX-55JZ1500E Operating Instructions Manual

Remote Control Mode Error

When the TV receives a signal with a different remote
control mode to the mode that is set on the TV five
times, Remote Control Mode Error is displayed.
Follow the on-screen instructions.
When all settings are initialised by performing [Shipping
Condition], the TV's remote control mode is reset to
mode 1. If you cannot operate the TV with your remote
control, press and hold [OK]/[MUTE]/[1] buttons for at
least 3 seconds to set the remote control to mode 1.

Remote Control Mode Reset

You can make a forced reset of the TV's remote control
mode to change to mode 1.
1
Get another Panasonic remote control whose remote
control mode has been set to 1
2
Point the remote control at the TV, then press the
MUTE button for about 15 seconds
3
When a screen asking you to confirm the forced reset
of the remote control mode is displayed, press the
MUTE button again for about 3 seconds
20
English

Voice controls

The TV recognizes speech when you talk into the voice
control microphone, enabling you to perform operations
such as changing TV channels, adjusting the volume,
searching for programmes, and doing internet searches.
If the remote control is not registered (paired) with the
TV, register (pair) the remote control.
The Google Assistant function may be in preparation
and the function will be available after the preparation
is complete. The Google Assistant function may
not be available depending on the country, area or
broadcaster.
The TV needs to be connected to the internet in order
to perform searches, etc.
The effective range for voice controls depends on the
viewing environment.
Operation may not be correct depending on the type
of voice the person has and the way they speak, as
well as the surrounding environment and conditions.
When other Bluetooth
the same time, voice controls may not work properly
depending on the connected devices.

Selecting the voice service (when it is not selected)

1
Press the voice control button
2
Selects the voice service for voice control function.
Only one voice service can be used with the TV.
The voice service selection screen can also be
displayed via [Voice Control] on the menu bar.
Controlling with your voice
1
Press the voice control button
2
Speak into the voice control microphone
For information about settings and operations for
voice controls, refer to [eHELP] (Search by Purpose >
Functions > Voice Control).
Functions of voice control and voice services are
subject to change without notice.
(p. 17)
(p. 14)
® devices are connected at
Voice control
microphone