Installing The Wall-Hanging Bracket; Adjusting The Panel To Your Desired Angle; Removing The Pedestal - Panasonic TX-55JZ1500E Operating Instructions Manual

To remove from the TV:
C
Adjusting the panel to your desired
angle
Do not place any objects within the full rotation range.

Removing the pedestal

Be sure to remove the pedestal in the following
procedures when you use the wall-hanging bracket or
repack the TV.
1 Remove the cable cover
2 Remove the assembly screws
3 Pull out the pedestal from the TV.
12
English
(View from the top)
.
from the pedestal.
Installing the wall-
hanging bracket
Please contact your local Panasonic dealer to purchase
the recommended wall-hanging bracket.
Holes for wall-hanging bracket installation
Rear of the TV
(View from the side)
15°
Depth of screw
15°
Diameter of screw
Screw for fixing the TV onto the
wall-hanging bracket (not supplied with
the TV)
Warning
Using other wall-hanging brackets, or installing
a wall-hanging bracket by yourself have the risk
of personal injury and product damage. In order
to maintain the unit's performance and safety, be
absolutely sure to ask your dealer or a licensed
contractor to secure the wall-hanging brackets. Any
damage caused by installing without a qualified
installer will void your warranty.
Carefully read the instructions accompanying optional
accessories, and be absolutely sure to take steps to
prevent the TV from falling off.
Handle the TV carefully during installation since
subjecting it to impact or other forces may cause
product damage.
Take care when fixing wall brackets to the wall.
Always ensure that there are no electrical cables or
pipes in the wall before hanging bracket.
To prevent fall and injury, remove the TV from its fixed
wall position when it is no longer in use.
300 mm
300 mm
minimum: 12 mm
maximum: 39 mm
M6