Remote Control Mode Setting; Installing / Removing Batteries - Panasonic TX-55JZ1500E Operating Instructions Manual

20 Rakuten TV
Accesses Rakuten TV service directly.
21 YouTube
Accesses YouTube service directly.
22 APPS
Displays [Apps] (applications list).
23 TV Guide
Displays Electronic Programme Guide.
24 EXIT
Returns to the normal viewing screen.
25 Cursor buttons
Makes selections and adjustments.
26 BACK
Returns to the previous menu / page.
27 SCENERY
Displays the currently selected scenery.
For details, refer to [eHELP] (Search by Purpose >
Home > My Scenery).
28 Operations for contents, connected equipment,
etc.
29 Teletext button
30 Channel Up / Down
31 Subtitles
Displays subtitles.
32 Last view
Switches to previously viewed channel or input
mode.

Installing / Removing batteries

Slide and lift
Note the correct polarity (+ or -)
Close

Remote Control Mode setting

If another Panasonic TV is near the TV, the other TV
may be operated when you use the remote control with
infrared. Change the TV's remote control mode to avoid
simultaneous operation.
Remote control mode 1 is the default setting.
1
Display the menu bar and select [Main Menu], and
then select [Setup]
Main Menu
select
access
2
Select the remote control setting menu in [System
Menu]
select
access
3
Select the remote control mode in [Mode Setting]
select
access
4
Select [Mode2]
select
access
Press and hold [OK]/[MUTE]/[2]* (numeric buttons)
buttons for at least 3 seconds, then press the OK
button.
To set to [Mode1], set to "1", to set to [Mode3], set
to "3", to set to [Mode4], set to "4".
When using the remote control mode 1, set the TV
and the remote control to mode 1 respectively.
Setup
19
English