Table of Contents
Advertisement
en Buttons
Buttons
Buttons
Below is an overview of the buttons
Buttons
and their setting options.
With the
button, you can open the
sub-menu for additional programme
settings. The additional programme
settings are listed in the overview for
the buttons.
Button
(Start/Reload/
Pause)
varioSpeed
Stains
i-Dos /
(Ready in)
°C (Temperature Selec-
tion)
(Spin Speed Reduc-
tion)
(mains switch)
26
Selection
¡ Start
¡ Cancel
¡ Pause
¡ Activate
¡ Deactivate
Multiple selection
¡ Activate
¡ Deactivate
¡ Dispenser contents
¡ Basic dosage
1–24 hours
– 90 °C
0 – 1600 rpm
¡ Switch on
¡ Switch off
The selection of programme settings
depends on the selected pro-
gramme. You can see the selection
options for each programme in the
overview for
→ "Programmes", Page 29.
Description
Start, cancel or pause the programme.
Activate or deactivate a short washing pro-
gramme.
Note: Energy consumption increases.
The washing result is not affected by this.
Select the type of stain.
The temperature, drum movement and soaking
time are all adjusted to suit the type of stain.
Briefly press the button to activate or deactivate
the intelligent dosing system for fabric softener
or liquid detergent
Press the button for approx. 3 seconds to open
the basic settings and specify the contents of the
dispenser or set the basic dosage.
→ "Overview of the basic settings", Page 52
→ "Intelligent dosing system", Page 46
Set the programme end.
The programme duration is already included in
the set number of hours.
Once the programme has started, the pro-
gramme duration is displayed.
Adjust the temperature in °C.
Adjust the spin speed or deactivate the spin
cycle.
If 0 is selected, the water is drained and the spin
cycle is deactivated at the end of the washing
cycle. The laundry stays wet inside the drum.
Switch the appliance on or off.
.
Advertisement
Table of Contents
