Epson ES-300C Manual page 7

ES-300C SCANNER
Installation / Support Tips
Software
1. When operating the EWOCIC scanner with an IBM
compatible computer, you must install the following:
o Software that supports the ES-3WC scanner or Epson's
Epscan II scanner program.
When operating the ES-3WC scanner with an Apple
2.
Macintosh computer, you must install the following:
Epscan II scanner program.
Note: To achieve the best final image, you may need tc make
multiple scans at various scanner settings.
set up
if you are using the scanner with an IBM-compatible computer,
connect the interface cable to the bidirectional parallel port on
the computer. Designate the interface board on the computer
as LPT2. Some systems may require that a bidirectional parallel
port be installed.
the SCSI interface board in the interface board slot. Then
connect the interface cable from the computer to the SCSI
connector on the scanner.
Scanners
6/30/90