Epson PowerLite Pro Cinema 800 User Manual page 23

Home theater projector

Hide thumbs Also See for PowerLite Pro Cinema 800:

Table of Contents

If you press the

button on the projector,

Source

Source button

you see a menu of available sources.

Press the u or d button to highlight a source and press the

button.

Select

If you select the Input A source using either the remote control or the menu above, you may

see the Input A menu:

Press the u or d button to highlight

(for component video with an NTSC signal) or

YCbCr

(for component video with an HDTV signal), or select

so the projector can

YPbPr

Auto

automatically detect the Input A source type. Then press the

button.

Select

Note:

If an image does not appear, check the troubleshooting tips on page 57.

To temporarily turn off the image and darken the screen, press the Blank button. Press the Blank

button again to return to normal viewing.

Setting Up the Projector

Table of Contents