Epson PowerLite Presenter User Manual page 65

The picture looks too light or too dark.
■
Press the button on the remote control to select the best setting for your viewing
environment. See page 26.
■
Adjust the
Brightness
■
If the picture looks darker than it used to, you may need to replace the lamp. See page 56.
The colors on the screen don't look right.
■
Press the button on the remote control to select the best setting for your viewing
environment.
■
Adjust the
Color Saturation
■
If you're using external video equipment, check the solutions on page 66.
The picture is wider at the top or bottom.
■
You've tilted the projector to raise or lower the image, causing it to become "keystoned."
Use the or
correct the problem.
The picture is taller on the left or right side.
The projector is set at an angle to the screen. Face it squarely toward the screen.
There is no sound, or the sound is not loud enough.
■
Try pressing the
+ Volume
■
Press the button on the remote control to make sure the sound hasn't been turned
off temporarily.
■
If you're using external video equipment with a component or composite video
connection, make sure you connected the red and white audio jacks to the projector's
audio ports (see page 29).
■
If you're using external equipment, you may need to adjust the Audio settings in the
setup menu (see page 50).
and settings. See page 48.
Contrast
or settings. See page 48.
Tint
buttons on the remote control or the Signal menu (see page 51)to
button on the projector or on the remote control.
65
Problem Solving