Choosing A Location - Epson PowerLite Presenter User Manual

Choosing a Location

You can use your PowerLite Presenter just about anywhere—in the classroom or conference
room, on a tabletop, desktop, or cart.
Your projector should be directly in front of the screen,
facing straight ahead (at a 90-degree angle to the surface).
If the image is too low, you can raise it by extending the feet
and tilting the projector up. This causes the image to lose its
rectangular shape, but the projector will correct it
automatically. If necessary, you can adjust the shape using
the keystone buttons on the remote control or the Visual
Setup menu. See page 21 for instructions.
The farther you place the projector from the screen, the
larger the image will be.
The following tables list the distances required for various image sizes (measured diagonally).
Note that the zoom adjustment also affects image size.
Wide screen aspect ratio (16:10)
Image size (diagonal)
33 in.
40 in.
50 in.
60 in.
80 in.
100 in.
150 in.
200 in.
320 in.
Standard aspect ratio (4:3)
Image size (diagonal)
29 in.
30 in.
16
Unpacking and Setting Up
Projection distance
3.0 to 3.6 ft. (0.91 to 1.1 meters)
3.6 to 4.4 ft. (1.1 to 1.3 meters)
4.6 to 5.5 ft. (1.4 to 1.7 meters)
5.5 to 6.6 ft. (1.7 to 2.0 meters)
7.4 to 8.9 ft. (2.3 to 2.7 meters)
9.2 to 11.1 ft. (2.8 to 3.4 meters)
13.9 to 16.7 ft. (4.2 to 5.1 meters)
18.6 to 22.3 ft. (5.7 to 6.8 meters)
29.8 to 35.7 ft. (9.1 to 10.9 meters)
Projection distance
3 to 3.6 ft. (0.9 to 1.1 meters)
3.1 to 3.7 ft. (0.9 to 1.1 meters)