Signal Menu - Epson PowerLite Presenter User Manual

■ Child Lock:
page 46 for more information.
■ High Altitude Mode:
above 4900 feet (1500 meters), to ensure that the projector does not overheat.
4. Press or to adjust the setting.
5. Press to exit the menu.

Signal Menu

1. Press on the remote control. You see the Visual Setup menu.
2. Press to highlight
3. Press until you see the option you want to set.
You can adjust the following items:
■ Keystone:
Adjust this setting to correct the shape of the image if the projector has
been tilted upward.
■ Auto Keystone:
the image when the projector has been tilted upward or downward.
■ Power Consumption:
as when projecting images in a dark room or onto a small screen). You cannot select a
Power Consumption setting when the Color Mode is set to
■ Resolution:
of the input signal. If necessary (because some of the image is missing, for example),
adjust to
Wide
■ Video Signal:
equipment. If no image appears or you see interference, select the appropriate signal.
4. Press or to adjust the setting.
5. Press to exit the menu.
Turn this setting on to lock the
Turn this setting on if you use the projector at an altitude
, then press
Signal
Select On to have the projector automatically adjust the shape of
Select
ECO
Set to to have the projector automatically identify the resolution
Auto
or .
Normal
Normally, you can leave this set to Auto when using external
button on the control panel. See
to select it.
if the images being projected are too bright (such
Doing More with PowerLite Presenter
.
Auto
51