Compatible Video Formats; Turning The Projector On And Off; Locking The Projector - Epson PowerLite Pro Cinema 800 Quick Manual

Compatible Video Formats

The projector supports NTSC, PAL, and SECAM, as well as
the digital video formats listed below.
Digital video formats
Format Signal name
SDTV 480i
480p
576i
576p
HDTV 720p
1080i

Turning the Projector On and Off

1. Connect the power cord to the projector and a grounded
electrical outlet.
2. Remove the lens cap.
3. Turn on any connected equipment you plan to use.
4. Turn on the power switch on the back of the projector.
Power switch
5. Press the button on the remote control, or press the
On
button on the projector.
P Power
The projector takes about 10 seconds to warm up. If you
don't see an image, you may need to select the image source
(see the next column).[]
Resolution Aspect ratio
×
960 720 4:3
×
960 720 4:3
×
960 720 4:3
×
960 720 4:3
×
1280 720 16:9
×
1280 720 16:9
Epson PowerLite Pro Cinema 800
Turning Off the Projector
1. Turn off any equipment connected to the projector.
2. Press the button on the remote control (or press the
Off
button on the projector twice).
Power
P
3. Let the projector cool for about 30 seconds.
4. Once the light stops flashing and stays on, turn off the power
switch on the back.
Caution: Turn the projector off when not in use. Continuous
24-hour-a-day use may reduce its overall life. Never unplug the
projector without pressing the
could damage it and reduce lamp life.

Locking the Projector

You can lock the projector to prevent the image from being
accidentally changed once it's adjusted, and to keep children
from using the projector without adult supervision.
1. Press the button on the projector or remote control.
Menu
2. Use the menu navigation buttons to open the
then open the
Operation
3. Choose from these options:
❏
to disable the P
Child Lock
projector's control panel unless it is pressed for about 3
seconds.
❏
Operation Lock
projector's control panel. To operate the projector, you
have to use the remote control.
4. Press to exit the menu system. Turn off the projector
Menu
to activate the Child Lock.
Basic Image Adjustments
Once the projector is turned on, use these functions to adjust
the image.
Selecting the Image Source
If you don't see the image you want,
press the button on the
Source
projector or the button on the remote
control that corresponds to the port to
which your video equipment is
connected.
11/05
button and letting it cool, or you
Off
menu.
button on the
Power
to disable all the buttons on the
Epson PowerLite Pro Cinema 800 - 5
menu,
Setting