Optimum Time ULTIMATE COMPACT ENDURANCE Quick Start Manual page 3

TO SET THE TIME AND CALENDAR ON THE WATCH
1. Press the "MODE" button to access the time and calendar display. (The letters "SW" will not be visible be-
cause you are not in stop watch mode, nor will either of the words Alarm 1 or Alarm 2 show because you are
not in the alarm modes).
2. Press the "SET" button and hold it down for 2 seconds. You will hear a 'beep' and either "AM", "PM" or "24HR"
will be flashing.
3. Press "ADJUST" to choose between 12 or 24 hour clock.
4. Press "MODE" to confirm your choice and make the hours flash.
5. Press "ADJUST" to alter the hour making sure if you are in 24 hour mode that you are not 12 hours wrong!
6. Press "MODE" to confirm and start the minutes flashing.
7. Press "ADJUST" to alter the minutes.
8. Press "MODE" to confirm and start the seconds flashing.
9. Press "ADJUST" to set the seconds to zero.
10. Press "MODE" to confirm and start the year flashing.
11. Press "ADJUST" to alter the year.
12. Press "MODE" to confirm and start the month flashing.
13. Press "ADJUST" to confirm and start the date flashing.
14. Press "START/STOP" to adjust between European date order (date, month, year), or American date order
(month, date, year).
15. Press either "SET" to confirm all your choices and exit the time setting mode or press "MODE" to go back to
stage 2 above and repeat the process.
16. If you have pressed "SET" to confirm the clock and calendar are now set.
3
NOTE
1. You can confirm your changes at any time using the "SET" button without having to go through the whole
sequence.
2. You can move a digit on by giving a single press or you can fast scroll through by holding the button down.
TO USE THE STOP WATCH
1. Press "MODE" to enter the stop watch function.
2. Choose between large stop watch/small time or small stop watch/large time using either "SET" button (The
stop watch has the letters "SW" before the display and the time has a clock icon before it ).
3. Press "START/STOP" to either start or stop the stop watch. This counts up only, and counts in hours, minutes,
and seconds.
4. To clear the stop watch make sure it is stopped and then press "ADJUST".
5. Whether the stop watch is running or not you can choose whether you want the stop watch or the clock on the
large digits by pressing "SET".
6. The minute alarm will sound at every minute during count up if the icon in the top right of the display is on.
7. To activate the minute alarm, stop the stop watch and zero it.
8. Press "ADJUST" and hold it down for 2 seconds until you hear a 'beep' which will either have turned the
minute alarm on or off depending on its previous state.
TO SET THE ALARM 1 AND THE HOUR STRIKE
1. Press the "MODE" button to access the ALARM 1 display. (The letters "SW" will not be visible
because you are not in stop watch mode, but Alarm 1 will show because you are in the alarm 1 mode).
2. Press the "SET" button and hold it down for 2 seconds. You will hear a 'beep' and the hours will be flashing.
4