Honeywell S9240F2051 Installation Instructions Manual page 23

6. Call for Fan
6
Call for Fan
Circulator ON
(Speed Determined by
Dip Switch settings)
Request
for Cooling YES
Received?
NO
Request
for Heat YES
Received?
NO
Call for Fan
NO
Removed?
YES
De-Energize
1
Circulator Per
Ramping Profile
1 CIRCULATOR LOW COOLING MODE AND HIGH COOLING MODE
HAVE SPECIFIC ON, OFF, AND SPEED RAMPING PROFILES.
THE SPECIFIC PROFILE IS SELECTED USING THE
DIP SWITCHES ON THE CONTROL.
Fig. 14. S9240F IFC sequence Fan Mode cycle.
S9240F2051 MODULATING INTEGRATED FURNACE CONTROL
Maintain Circulator at
5
Go to Call for Cooling
set speed
1
Go to Call for Heat - 2 Stage Thermostat
Maintain Circulator at
– OR –
set speed
4
Go to Call for Heat - Single Stage Thermostat
Maintain Circulator at
set speed
23
M28159
69-2807—01