Advertisement
Digital Wireless Receiver Module
Setting channel synchronization
a. When both microphones are set as Master:
1. First powered on microphone will be set as channel A, and the second is
channel B.
2. When channel A microphone is shut off or out of signal for more than 5
seconds, B channel microphone auto switches to channel A.
3. Both channels A and B need to be within the range of
power on.
b. When the microphones are assigned as Master and Slave:
1. Preset Master microphone will be identifying as channel A and the slave
will be channel B.
2. When channel A microphone is shut off or out of signal for more than 5
seconds, B channel microphone auto shuts off.
3. Only when microphone is set to salve and push to talk mode, the
synchronization is at full range. The other modes are set within 15 meters.
4
15
meters when
,
Advertisement
