Advertisement
123
50
Install the Basin
NOTE! The lavatory tops must be installed on a cabinet or
matching metal stand (refer to Installation and User Guide
packed with the cabinet or stand for installation details).
!
Recommend Kohler metal square leg or Kohler bathroom
furniture for support or decoration.
·
Rough-in the supplies and the drain piping.
NOTE:
The supply stop handles cannot extend more than
76mm from the finish wall when in the open position.
·
Drill two 10mm hanger bolt holes at the marks on the wall.
The nylon anchors is needed for concrete wall (supplied).
·
Mount hanger bolts to the wall so approximately 65-75mm
of each bolt remains exposed.
NOTE:
1. Height dimensions marked in fig. 2 could be
adjusted per your the vanity height or the actual
height of the console leg.
2. Other fastening devices of sufficient size and
strength may also be used.
1196536-T01-A
90 100
220
Kohler reserves the right to change marked dimensions without prior notice.
Wall Plug
Attachment
Bolt (x2)
K-2746T-8
909
300
101.6
3X
35
45
335
541
Fig.#1
1
!
·
76mm
·
(
·
75mm
1.
2
2.
Waste
Outlet
Waste
Fig.#2
2
-2-
101.6
70
219
525
)
10mm
)
(
65-
Advertisement
