Advertisement
Remote Bluetooth Operation
The appliance can be controlled remotely using a smartphone or similar
device. To facilitate this remote operation it is necessary to first download
the Dimplex
app. The app is available on both android and IOS
devices and is available free from the Apple or Android App store. The App is
compatible with Android version 4.3 and above and IOS version 5 and above.
Once the App has been downloaded it is necessary to pair the appliance
with the smartphone to complete the remote setup. Please follow the steps
shown below:
1. Launch the Dimplex
2. To initiate pairing mode on the appliance press and hold the ' ' button
for two seconds. The LCD screen will go blank with the exception of the
Bluetooth
logo flashing in the bottom right hand corner, See Fig.13.This
indicates that the device is advertising to be paired with the
3. On the smart phone the appliance should now be visible on the pairing
screen, this will be a unique 6 digit code but will always start with EC, for
example 'ECBC17'. Select this device and press connect to initiate pairing.
4. Once the paring process is complete the app can be used to control the
appliance.
5. Once paired successfully the Bluetooth logo will stop flashing and the
Bluetooth neon will be illuminated.
Safety – overheat protection
For your safety, this appliance is fitted with a thermal cut-out. In the event
that the product overheats, the cut-out switches the heater off automatically.
To bring the heater back into operation, remove the cause of the overheating,
then unplug or turn off the electrical supply to the heater for a few minutes.
When the heater has cooled sufficiently, re-connect and switch on the heater.
Important Notes
Although this heater is manufactured to comply with the relevant safety
standards, certain types of carpets could become discoloured by the
temperatures under a portable heater. If you are concerned about this,
we recommend that you contact the carpet manufacturer for guidance.
Alternatively, either stand the heater on a suitable base to shield the carpet
– call our Helpline for further advice.
You may notice some parts of the element appearing to be hotter from time
to time because of the variable airflow through the heater. This does not
cause a safety hazard.
The heat outlet grille may become discoloured with use – this is caused by
airborne pollution and is not a fault.
app on the smartphone or similar device.
Flashing
Recycling
For electrical products sold within the European Community.
At the end of the electrical products useful life it should not be
disposed of with household waste.
Please recycle where facilities exist.
Check with your Local Authority or retailer for recycling advice
in your country.
Cleaning
WARNING – ALWAYS DISCONNECT FROM THE POWER SUPPLY
BEFORE CLEANING THE HEATER.
Before commencing cleaning, switch off the heater and allow it to cool.
Disconnect the electricity supply to the appliance.
The outside can be cleaned by wiping it over with a soft damp cloth and
app.
then dried. Do not use abrasive cleaning powders or furniture polish, as
this can damage the surface finish.
After Sales Service
Please see the separate Warranty leaflet for details of your Warantee & after
sales service including contact details.
Should you require after sales service, please get in touch with the supplier
through whom you purchased the appliance, or the contact number on your
Warranty leaflet.
Fig. 13
Advertisement
