Table of Contents
Related Manuals for Dimplex 403TSFTIE7
Summary of Contents for Dimplex 403TSFTIE7
- Page 1 INSTRUCTION MANUAL Installation and Operating Convector Heaters Model: 403TSFTIE7 These instructions should be read carefully and retained for future use. Note also the information presented on the appliance. 08/54446/0 ISSUE: 2 Series: A...
-
Page 2: Important Safety Advice
Installation and Operating Instructions IMPORTANT: THESE INSTRUCTIONS SHOULD BE READ CAREFULLY BEFORE USE AND RETAINED FOR FUTURE REFERENCE IMPORTANT SAFETY ADVICE years shall only switch on/off the appliance provided WARNING: To avoid danger of suffocation please that it has been placed or installed in its intended normal operating position and they have been given remove all packaging materials particularly plastic and EPS and keep these away from vulnerable... -
Page 3: Electrical Connection
Dimensions (millimetres) Model Specification 403TSFTiE7: 3.0kW convector heater with electronic controls and turbo boost Electrical Connection WARNING: THIS APPLIANCE MUST BE EARTHED The use of an extension lead or multi-plug adaptor is not adviced when connecting this product to the mains. Connection through these deviceS could lead to risk of overloading, overheating and even fire at the extention lead or adaptor due to inadequate connection quality This heater must be used on an AC (~) supply only and the voltage marked on the heater must correspond to the supply voltage. -
Page 4: Wall Mounting
Locate the heater on the top brackets and allow it to hang in place. Fit Using the Heater the bottom bracket into the slot in the heater and then fix it to the wall. Test that the heater is now securely fixed to the wall. WARNING: DO NOT USE THE HEATER UNTIL THE FEET OR WALL BRACKETS ARE FITTED CORRECTLY Free Standing Use... -
Page 5: Key Functions
Selecting the Operating Mode Key Functions MODE • Automatic mode (week program) • Manual operation ON • Manual operation OFF ENTER • Save entry PROG • Week program, set clock KEYS +/- • Used to navigate through the menu and to change the setting values Pressing the MODE key switches the operating mode between MANUAL Operating Modes ON, MANUAL OFF and AUTO. -
Page 6: Turbo Fan
Use the +/- keys to set the weekday Setting time block ON • press the ENTER key. P1 (period 1) and ON apprears. The hours display flashes • Use the +/- keys to set the hours. Press the ENTER key. The minutes display flahses. -
Page 7: Warranty
A brand of the GDC Group Limited, trading as Glen Dimplex Heating & Ventilation If you have any questions about what the Dimplex Warranty covers and does not cover or how to claim under the Dimplex Warranty, please contact us:... - Page 8 Glen Dimplex Heating and Ventilation Millbrook House, Grange Drive, Hedge End, Southampton, SO30 2DF © Glen Dimplex. All rights reserved. Material contained in this publication may not be reproduced in whole or in part, without prior permission in writing of Glen Dimplex This product complies with the European Safety Standards EN60335-2-30 and the European Standard Electromagnetic Compatibility (EMC) EN55014, EN60555-2 and EN60555-3.