Reboot The Extender; Change Login Password - Mercusys ME20 User Manual

Note:
1. During the reset process, do not power off or reset the extender.
2. We strongly recommend you back up the current configuration settings before resetting the extender.
5.6

Reboot the Extender

You can reboot your extender to clear cache and enhance running performance if
needed.
1. Visit http://mwlogin.net, and log in with the password you set for the extender.
2. Go to Settings > System Tools > Reboot.
• To reboot the extender
Click REBOOT and wait a few minutes.
• To set up reboot schedule
Enable Reboot Schedule and set the corresponding settings.
5.7

Change Login Password

The account management feature allows you to change your login username and
password of the web management webpage.
1. Visit http://mwlogin.net, and log in with the password you set for the extender.
2. Go to Settings > System Tools > Change Login Password.
3. Enter the old password. Then enter the new password twice (case-sensitive) and
click SAVE.
Chapter 5 Manage the Extender
27